3 keys for successful side

Split application of nitrogen fertilizer for corn has increased in popularity in recent years as new equipment has become available.

Editor's note: The following was written by Brad Carlson, University of Minnesota Extension educator, for the Minnesota Crop News website March 7.

Split application of nitrogen fertilizer for corn has increased in popularity in recent years as new equipment has become available. The wide range of options available to growers can be confusing.

Here are three key considerations for determining which side-dress practices are best for your farm.

1. Who will do the application and with what equipment?

Many farmers have acquired their own application equipment. This will dictate what type of fertilizer is used and the placement of the fertilizer. If you intend to have it custom-applied, you will also be bound by the equipment options available.

Know the advantages of each type of application. Urea is likely to be cheaper than UAN. Additionally, in-season application with a spin spreader is probably the fastest application method. Most farmers are not set up to make a top-dress urea application themselves, so it has to be arranged with a commercial applicator.

The proliferation of farmer- owned, self-propelled sprayers for post-emergence applications has given many farmers the ability to side-dress their own N with UAN. The main advantages of this are timeliness, quality control, and the economic advantage of spreading the cost of equipment over more acres.

Urea and UAN solutions can damage the leaves of the crop. Whatever you do, try to minimize contact with the plants. When using a spin spreader, avoid applying urea when leaves are wet, and do it before a large whorl develops, which can act as a funnel capturing urea granules.

2. How much of your N should be applied as side-dress, and when during the growing season should you apply?

Several research projects have consistently shown that lighter-textured soils benefit from a higher proportion of N applied as side-dress. This is due to the increased risk of N loss from a spring pre-plant application.

In finer textured soils, a timely split application may or may not be worth the cost every year, depending on the potential for N loss. In excessively wet years or areas in the field where soils tend to stay wet after rainfall, split applications have a better chance to improve yields.

If you want to split-apply nitrogen in corn-on-corn situations, you should apply a higher rate as pre-plant because high residue levels can temporarily immobilize N and lead to deficiency symptoms early in the growing season. Corn-following- soybean fields can have a higher percentage of total N applied as sidedress, which can be a real time saver when spring fieldwork conditions are challenging and limited working days place a higher priority on getting the crop planted.

University of Minnesota research has shown that 40 pounds of N per acre pre-plant is usually enough to get the crop started until an in-season application, as long as you side-dress no later than V8 to V9. The V4 to V8 stage seems to be the best time to side-dress nitrogen in Minnesota.

3. Do you need to use a urease inhibitor?

Top-dress-applied urea requires rainfall (or irrigation) amounting to at least a quarter inch within four days after application to prevent N loss by volatilization. Heavy dew or light rainfall that dissolves the urea granules and spreads them out without moving the urea into the soil may actually increase the risk of volatilization loss.

Incorporating the fertilizer into the soil deeper than one inch with a cultivator will prevent this problem. Using a urease inhibitor can buy you additional time, up to 10 days or so.

Twice daily updates on markets.

May is an interesting month for USDA reports.The weekly Crop Progress reports document the speed at which the new spring crops are entering th…

One of the most daunting challenges facing agronomic crop production is the continuing evolution of weeds resistant to herbicides.